Skocz do zawartości

  • Zaloguj korzystając z Facebooka Zaloguj korzystając z Twittera Zaloguj przez Steam Zaloguj poprzez Google      Logowanie »   
  • Rejestracja

Witamy w Nieoficjalnym polskim support'cie AMX Mod X

Witamy w Nieoficjalnym polskim support'cie AMX Mod X, jak w większości społeczności internetowych musisz się zarejestrować aby móc odpowiadać lub zakładać nowe tematy, ale nie bój się to jest prosty proces w którym wymagamy minimalnych informacji.

  • Rozpoczynaj nowe tematy i odpowiedaj na inne
  • Zapisz się do tematów i for, aby otrzymywać automatyczne uaktualnienia
  • Dodawaj wydarzenia do kalendarza społecznościowego
  • Stwórz swój własny profil i zdobywaj nowych znajomych
  • Zdobywaj nowe doświadczenia

Dołączona grafika Dołączona grafika

Guest Message by DevFuse
 

Zdjęcie

HLTV - nie moze wejsc a serwer


  • Nie możesz napisać tematu
  • Zaloguj się, aby dodać odpowiedź
2 odpowiedzi w tym temacie

#1 Piwo

    Początkujący

  • Użytkownik

Reputacja: 0
zer0.

  • Postów:15
  • Lokalizacja:Browar
Offline

Napisano 31.03.2015 21:05

Jesli to jest zly dzial to proszę o przeniesienie, lecz nie znalazlem zadnego dzialu zwiazanego z hltv. Mam taki problem otoz moje hltv nie moze wejsc na serwer, w konsoli hltv: "Connection rejected: Sorry, HLTV is not allowed on this server." Dziwne ze hltv z localhosta dziala... Konfiguracja hltv:

// HLTV Proxy configuration file

// HLTV proxy runs this file on start up
// This file should only be edited if you want to broadcast a game

// set HLTV proxy name as shown in score board
name "HLTV xxx""

// set HLTV name, how it should appear in game server browsers
// hostname 		"ZlapZaBron.pl HLTV"

// set offline info text clients will see as reject reason if HLTV isn't broadcasting yet
offlinetext "Sorry, game is delayed. Please try again later."

// delays broadcasting for 30 seconds
delay 30.0

// allow 3.5 KByte/sec as client rate. This is good a value
// for internet broadcasts. On LAN you may set this value to 10000
maxrate 3500

// log HLTV console in proxy.log 
// logfile 1		

// local chatting for HLTV spectators enabled
chatmode 1

// if game server is password protected, enable this line
// serverpassword	"mypassword"

// proxy's adim password for rcon, commentator etc.
adminpassword "xxx"

// show message for 5 seconds each 60 seconds in center of X axis (-1) and
// above help text bar (0.85). Color given as hexadecimal RGBA .
loopcmd 1 60 localmsg "Ogladasz HLTV ZlapZaBron.pl" 5 -1 0.85 FFA000FF

// hltv.tga will be shown instead of the default HLTV logo in spectator GUI
// bannerfile "hltv.tga"

// these commands will be executed on connecting spectator client and may be used
// to adjust settings for HLTV (for example voice parameters)
signoncommands "voice_scale 2; voice_overdrive 16; volume 0.5; echo Voice adjusted for HLTV"
publicgame 1
autoretry 1
connect xxxx

echo hltv.cfg loaded.

i konfiguracja dproto:

# ========================================================
# 		DPROTO CONFIGURATION
# ========================================================

#
# General rule for modifying this file:
#	DONT CHANGE ANYTHING IF YOU DONT KNOW WHAT IT MEANS!
#


# ========================================================
# 		AUTHID MANAGEMENT
# ========================================================

# ClientID types (for cid_* options)
#  1: Real (or generated by HW) steam (STEAM_xx:xx:xx)
#  2: Real (or generated by HW) valve (VALVE_xx:xx:xx)
#  3: STEAM_ by IP
#  4: VALVE_ by IP
#  5: Deprecated - client will be rejected
#  6: reserved for future use
#  7: HLTV
#  8: STEAM_ID_LAN
#  9: STEAM_ID_PENDING
#  10: VALVE_ID_LAN
#  11: VALVE_ID_PENDING
#  12: STEAM_666:88:666

# Use these options to set authid's for clients

# for HLTV (default is HLTV [7])
cid_HLTV = 5

# for p.47 clients that do not support unique id generation (default is STEAM_ID_LAN [8])
cid_NoSteam47 = 4

# for p.48 clients that do not support unique id generation (default is VALVE_ID_LAN [10])
cid_NoSteam48 = 4

# For Legit Steam clients (default is real STEAM_xx:xx:xx [1])
cid_Steam = 1

# Client recognized as pending when they sucessfully authorized, but did not get steam id
# REMARK: Actually, it got steamid, but it is useless (STEAM_0:0:0 for example)
# default is STEAM_ID_PENDING [9]
cid_SteamPending = 9

# For players having revEmu ( >= 9.74) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu = 1

# For players having RevEmu 2013 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_RevEmu2013 = 1

# For players having SteamClient 2009 / revEmu > 9.82 on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SC2009 = 1

# For players having old revEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_OldRevEmu = 1

# For players having hCupa's SteamEmu on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_SteamEmu = 1

# For players having AVSMP (Cracked Steam) on client-side:
# default is real STEAM_xx:xx:xx [1]
cid_AVSMP = 1

# For SETTI ServerScanner
# default is STEAM_xx:xx:xx generated by IP [3]
cid_Setti = 3

# For SXEI Clients
# default is real STEAM_xx:xx:xx [1]
cid_SXEI = 1

# EnableSXEIdGeneration (0 / 1)
# Turns on steamid generation based on info sent by sXeI client
# Enable this only if you have sXeI server installed!
EnableSXEIdGeneration = 0

# SC2009_RevCompatMode (0 / 1)
# Enable fix to make steamids generated for SC2009 compatible with revEmu
SC2009_RevCompatMode = 1

# SteamEmuCompatMode (0 / 1)
# An analog for eSTEAMATiON's EnforceSteamEmuCompatIDMode option.
# Affects only Old RevEmu and SteamEmu emulators.
SteamEmuCompatMode = 1

# OldEstCompatMode (0 / 1)
# Enables/Disables fix for steamids generated by eST in 0.3.1 version.
# Set this to 1 if you want to make steamids generated by eST as in < 0.3.0 versions.
OldEstCompatMode = 0

# SteamIdHashSalt (string)
# Salt string for SteamIDs hashing. Irreversibly changes SteamIDs. Applies only to SteamIDs generated by emulators.
# Should be more than 16 chars length. If string is empty, hashing is not applied.
SteamIdHashSalt = 

# IPGen_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by IP
IPGen_Prefix1 = 0

# IPGen_Prefix2 (int)
# STEAM_a:b:c
# second prefix (b) for authids generated by IP
IPGen_Prefix2 = 4

# Native_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by native auth method (Steam)
Native_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by Steamclient 2009
SC2009_Prefix1 = 0;

# RevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu
RevEmu_Prefix1 = 0;

# RevEmu2013_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by RevEmu2013
RevEmu2013_Prefix1 = 0;

# OldRevEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by old RevEmu
OldRevEmu_Prefix1 = 0;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids generated by SteamEmu
SteamEmu_Prefix1 = 0;

# SteamEmu_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for AVSMP Clients (Cracked steam)
AVSMP_Prefix1 = 0;

# Setti_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for Setti server scanner
Setti_Prefix1 = 0;

# SXEI_Prefix1 (int)
# STEAM_a:b:c
# first prefix (a) for authids assigned for sXeI clients
SXEI_Prefix1 = 0;


# Note that banid will use steamid WITHOUT any prefixes!


# ========================================================
# 		ATTACKS SUPRESSION
# ========================================================

# FakePlayers_ConnectInitiationCheck (seconds)
# Sets the time, in seconds, in which client should initiate
# game session (in other words, send the "new" command) after it has
# been connected. If client did not initiated game session, it will be marked as
# fake and kicked.
#   Default is 6 seconds.
#   Use 0 to disable this check.
FakePlayers_ConnectInitiationCheck = 6

# FakePlayers_ClientValidationCheck (seconds)
# Sets the time, in seconds, in which client should answer to random unique command
# sent by the server. If client did not answered for this command, it will be marked as
# fake and kicked.
#   Default is 8 seconds.
#   Use 0 to disable this check.
FakePlayers_ClientValidationCheck = 8

# FakePlayers_AntiReconnect (0/1)
# Enables detection of fakeplayers that reconnects quickly (every < 10 seconds)
# before fake players checks have completed.
# This check will work only if FakePlayers_ClientValidationCheck and
# FakePlayers_ConnectInitiationCheck are enabled.
#   Default is 1 (ON).
FakePlayers_AntiReconnect = 1

# FakePlayers_CommandsOrderCheck (0/1)
# Enable commands order checking on the start of initiated connection.
#   Default is 1 (ON).
FakePlayers_CommandsOrderCheck = 1

# FakePlayers_BanTime (minutes)
# Dproto will ban IP spamming fakeplayers for time (in minutes) specified in this variable
#   Default is 120 minutes.
#   Use 0 for permanent ban.
#   Use negative vaules to disable ban (fake players will only be kicked).
FakePlayers_BanTime = 120

# Exploits_CheckDownloads (0/1)
# Enable checking of requested download files against precached resources.
#   Default is 1 (ON).
Exploits_CheckDownloads = 1

# Exploits_DisableUploads (0/1)
# Disable file uploads (not customizations) to the server.
#   Default is 1 (ON).
Exploits_DisableUploads = 1


# ========================================================
# 		OTHER STUFF
# ========================================================

# LoggingMode:
#   0 = None
#   1 = Console
#   2 = Log Files
#   3 = Both
LoggingMode = 2

# ThreatsLoggingMode
# Enable logging of threats details.
#   Default is 0 (OFF).
ThreatsLoggingMode = 0

# DisableNativeAuth (0/1)
# Disables valve/steam auth system.
#   For p.47 Based: Server will not connect to auth servers.
#   For All: Server will not call authorization functions.
# This is a fix for startup freeze for old (p.47) servers.
DisableNativeAuth = 0

# ServerInfoAnswerType (0/1/2)
# Sets server answer type for query requests
#   0 = New style (Source Engine)
#   1 = Old Style (Fix favorites list for p.47 clients)
#   2 = Hybrid mode - Server is visible anywhere, but there are 3 packets generated for every serverinfo request
ServerInfoAnswerType = 0

# Game_Name (string)
# Sets game name displayed for clients
# If Game_Name is empty, native game name will be used
Game_Name = DD2+BF2

# Enables fix for proper player id displaying on HLStats server monitoring
# Enable this only if you have HLStats
HLStatsPlayerIdFix = 0

# ExportVersion (0 / 1)
# Enables/Disables exporting of dp_version cvar
#   1 = dp_version cvar will be exported to server rules. It will be visible in server monitoring tools (like HLSW)
#   0 = dp_version cvar will not be exported to server rules.
ExportVersion = 1

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = xxx

wszelkie adresy zamienilem na xxx, aby nie bylo reklamy, lecz hasla i IP sa na pewno dobrze. Co moze byc powodem? Dodam iz hltv jest na windowsie a hlds na linuxie (choc watpie ze to moze miec naczenie)


  • +
  • -
  • 0

#2 Ogen Dogen

    Guru

  • Power User

Reputacja: 222
Profesjonalista

  • Postów:713
  • GG:
  • Steam:steam
  • Imię:Marcin
  • Lokalizacja:Dąbrowa Górnicza
Offline

Napisano 01.04.2015 00:02

# for HLTV (default is HLTV [7])
cid_HLTV = 5

Dproto nie dopuszcza HLTV. Zmień tą wartość na 7 lub wpisz adres IP HLTV na końcu configu : (bez portu)

# HLTVExcept_IP (ip addr)
# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)
HLTVExcept_IP = xxx

Sprawdź czy masz ustawione :

sv_proxies 1

  • +
  • -
  • 0

b_350_20_360204_C20008_FFFFFF_000000.png 193.33.176.115:27015

 

94e23d811c.png

 


#3 Piwo

    Początkujący

  • Autor tematu
  • Użytkownik

Reputacja: 0
zer0.

  • Postów:15
  • Lokalizacja:Browar
Offline

Napisano 01.04.2015 10:42

# HLTV from this IP will be able to join the server even if cid_HLTV is set to 5 (deprecated)

 

z tego wynika, ze z tego ip bedze moglo mimo wszystko wejsc hltv. Ale probowalem z cid_HLTV = 7 i tez nie moze wejsc... sv_proxies jest na 1 i ip tez podane bez portu (kopiowalem, tak ze raczej sie nie pomylilem). Jest mozliwe, ze zle zczytuje ip przez ta spacje na poczatku w HLTVExcept_IP = xxx ?? moze powinienem to wpisac tak HLTVExcept_IP =xxx lub HLTVExcept_IP ="xxx"?? Gdzie sie znajduja logi hltv? Moze z logow cos sie dowiemy


  • +
  • -
  • 0




Użytkownicy przeglądający ten temat: 0

0 użytkowników, 0 gości, 0 anonimowych